Safire Multicoat is a co-polymer water based coating designed to provide flexible protection to barriers and for penetrations through penetration seals.

• Halogen free
• Flexible
• Waterproof
• Encapsulates Mineral Fibre
• Stops flame propagation
• Spray or trowel/brush
• Class ‘O’

Recommended Thickness
Wet film thickness of 2mm is required to achieve DFT of 1mm.

Coverage
Approximately 1.4litres/m2 to achieve required thickness.

Site Service
An advice and support service is offered to architects, specifiers and contractors.

TECHNICAL SPECIFICATION Composition Water based co-polymer acrylic Colour White (other colours available) Moisture content Brush & Trowel 36-41% Density Typical value 1.35 pH Value Approx. 9 Toxicity Non-toxic Storage Temp. 5-30ºC Shelf Life In closed original container at least one year Packaged 5L and 15L plastic buckets Drying time 2-4 hours touch dry Clean up Any tools should be cleaned with water immediately after use

Downloads  brochure COSHH safety data sheet (72kb)